T-1 Pro CO ₂ Controller

The T-1 Pro CO ₂ Controller is the most advanced CO ₂ controller on the market. It helps to accurately create the correct CO ₂ value in your space. You can set up the T-1 Pro in a few simple steps, after which you can take full advantage of all its possibilities! For example, the T-1 Pro has an automatic CO ₂ dosing counter, a log of the past 7 days and an adjustable pulse dosing to get a stable CO ₂ value in your room. He also has a dosing retarder. This function ensures a delayed activation of the CO ₂ dosage in your room. The T-1 Pro is adjustable from 300 to 2000 ppm or from 300 to 10000 ppm. You can read the current values of the connected sensors and the minimum / maximum values on the display. The T-1 Pro Controller automatically switches between day and night settings through light detection. Thanks to the built-in calibration function you can calibrate your CO ₂ sensor in the open air if necessary.

The T-1 Pro is supplied without sensor.

Characteristics

• Adjustable from 300 to 2,000 ppm or from 300 to 10,000 ppm.
• Adjustable dosing retarder and timer.
• Automatic CO ₂ dosing counter
• Dose log (dose log) of the dose counter for the past 7 days.
• Pulse dosing for dosed addition of CO ₂ .
• Built-in calibration function to calibrate the CO ₂ sensor in the open air.
• Depending on the sensor (s) connected, the display shows the measured values of CO ₂ , temperature and humidity.
• Shows the minimum / maximum values of connected sensor (s) in the display.
• The display is refreshed every second.
• Indication LEDs are used for CO ₂ dosing, light detection and stable climate.
• Possibility to connect various TechGrow devices together.
• Memory for power failure for setpoint and hysteresis.
• The controller automatically switches between day and night mode through the light sensor.
• Automatic switch off of the display backlight after 60 seconds.
• Automatic detection of cable break or poor contact of the connected sensors.
• Connection of the sensors with standard network cable (UTP).
• Various sensors are available separately (0-2,000 ppm / 0-10,000 ppm).
• Possibility to connect the TechGrow Datalogger (DL-1).

Technical specifications

• Power supply: 100 to 240 V
• Recording: 3 W (with sensor, without CO ₂ source)
• Setting range CO ₂ set: 300 to 2,000 ppm / 300 to 10,000 ppm
• Setting range CO ₂ +/-: 20 to 200 ppm (advice 50 ppm hysteresis)
• Measurement time: 1 measurement per second