Aquamaster Combo Pen P160 Pro, pH/EC/PPM/TDS/temp

Aquamaster Combo Pen P160 Pro, pH/EC/PPM/TDS/Temp

The renewed Combo Pen P160 Pro has been further developed and has improved software. The big advantage of this model is that the EC is calibrated analog, so that the calibration fluid does not necessarily have to be 25 C. You calibrate without deviations.

EC buffer solutions are very temperature sensitive, but this is not the case for pH. The electrode is easy to replace if it is worn or broken. This model is supplied in a robust storage case including pH 4.01, pH 7.00 and EC 1413 buffer solutions, so that the meter can be calibrated at a later time.

The Combo Pen P160 Pro is ideal for measuring pH, EC, PPM, TDS, US and temperature of plant nutrient water and water in swimming pools, jacuzzis and ponds. The easy-to-use buttons allow you to easily switch between parameters. The meter is calibrated and supplied with batteries.

How does the meter work?

1. Remove the protective cap.
2. Clean the electrode carefully with distilled water and dry it.
3. Press the On/Off button to start the meter.
4. Insert the meter upright into the solution up to the edge and stir gently. Wait a few seconds until the correct value appears on the display.
5. Press the Temp/CAL button to switch between temperature and fahrenheit.
6. Press the PH/EC button to switch between pH and EC.
7. Make sure the meter is in EC mode to switch between EC, US, TDS and PPM. Then press and hold the PH/EC button for more than 5 seconds to switch parameters.
8. After use, rinse the electrode with water and press the On/Off button to turn off the meter.

We recommend storing the meter upright with KCI storage solution in the protective cap.

Product specifications:

• Waterproof
• IP65 standard
• Replaceable electrode
• Ready to use immediately
• Temperature displayed in Celsius and Farhenheit

Range:

• PH: 0.00 ~ 14.00
• EC: 0.00 ~ 19.99 (equals 19990 us/cm)
• Temperature: -50ºC - +70ºC (-58ºF - +158ºF)

Resolution:

• PH: 0.1pH
• EC: 0.1 (equivalent to 10us/cm)
• Temperature: 0.1ºC ( 0.2ºF )
• Accuracy:
• PH: 0.1 pH
• EC: 2% FS
• Temperature: 1ºC (2ºF)
• Temperature compensation: 0ºC to 50ºC (32ºF to 122ºF )
• Working Temperature: 0ºC ~ 50ºC ( 32ºF ~ 122ºF )
• Power supply: DC 4.5V
• Battery: 3x1.5V AG-13 Button cell (included)
• Dimensions: 188x40x40mm.
• Weight: 80gr.

This package contains

• 1 x Combo Pen P160 Pro
• 1 x Storage box
• 1 x Buffer solution pH 7.00 50ml
• 1 x Buffer solution pH 4.01 50ml
• 1 x Buffer solution EC 1413 25ml
• 1 x Screwdriver for calibration