TechGrow Clima Micro Plus 5A (Temp-RH) (excluding Temp / RH sensor)

Clima Micro Plus Temp / Humidity Fan Control

Reach the right temperature and relative humidity in your room with the Clima Micro Plus Temp / Humidity Fan Control.

The Clima Micro Plus Temp / Humidity Fan Control is easy to operate with three knobs. This sets the minimum rotational speed (speed) of your fan, as well as the desired relative humidity and temperature in your room. This controller also has the option to set a hysteresis for temperature and relative humidity.

The clear display shows alternately the current room temperature and relative humidity, corresponding setpoint and hysteresis, the minimum and maximum measured values for temperature and relative humidity, the current fan speed and the setpoint minimum fan speed.

Characteristics

• The Clima Micro Plus Temp / Humidity Fan Control can measure and display the current temperature and relative humidity of connected sensors, and record and display the minimum / maximum values
• This controller controls the minimum fan speed to reach or maintain the desired temperature and relative humidity
• Minimum fan speed, setpoint temperature and setpoint relative humidity are saved in the event of a power failure
• Temperature setting range: 15 ° C - 35 ° C
• Hysteresis Temp: 1 ° C - 5 ° C
• Setting range relative humidity: 40% - 90%
• Hysteresis RH: 0% - 5%
• Minimum fan speed setting range: 10% - 100%
• The display is updated every second
• Automatic switch-off of the display backlight after 60 seconds
• Automatic detection of cable break or poor contact with the connected sensors
• 2 UTP ports
• Available in the version: 5A
• Easy-to-replace fuse (spare fuse included)
• Minimum required sensor: Temp / RH Sensor
• Various sensors are available separately
• Possibility to connect the TechGrow Datalogger (DL-1)