TechGrow Clima Micro Plus 5A (Min-Max speed) (excluding temp probe)

Clima Micro Plus Min / Max Fan Speed

With the Clima Micro Plus Min / Max Fan Speed you keep the temperature in your room at the right level. In addition, you determine the minimum and maximum rotational speed (speed) of your fan in an instant.

The Clima Micro Plus Min / Max Fan Speed is easy to operate with three knobs. This sets the minimum and maximum rotational speed of your fan and the desired room temperature. This controller also has the option to set a hysteresis.

The clear display shows the current room temperature, as well as the desired temperature, the fan speed, minimum and maximum measured temperature, and hysteresis.

Characteristics

• The Clima Micro Plus Min / Max Fan Speed can measure and display the current temperature value of connected sensors, and record and display the minimum / maximum values
• This controller controls the minimum and maximum fan speed to reach or maintain the desired temperature
• Minimum / maximum fan speed and temperature setpoint are saved in the event of a power failure
• Temperature setting range: 15 ° C - 35 ° C
• Hysteresis setting range: 1 ° C - 5 ° C
• Minimum fan speed setting range: 10% - 100%
• Maximum fan speed setting range: 45% - 100%
• The display is updated every second
• Automatic switch-off of the display backlight after 60 seconds
• Automatic detection of cable break or poor contact with the connected sensors
• 2 UTP ports
• Available in the version: 5A
• Easy-to-replace fuse (spare fuse included)
• Minimum required sensor: TempProbe
• Various sensors are available separately

Possibility to connect the TechGrow Datalogger (DL-1)