
Aquamaster p110-pro digital ph/ec/temp meter
Aquamaster p110-pro digital ph/ec/temp meter The renewed Combo Pen P110 Pro has a modern, robust housing. In addition, the software has been improved, so that accurate measurements can now be read faster. The electrode is easy to replace if it is worn or
- Voor 16:00 besteld, dezelfde dag nog verstuurd!
- Gratis verzending vanaf €250,- in NL
- More information? Contact us about this product
Aquamaster p110-pro digital ph/ec/temp meter
The updated Combo Pen P110 Pro has a modern, robust housing. In addition, the software has been improved, so that accurate measurements can now be read faster. The electrode is easy to replace if it is worn or broken.
The Combo Pen P110 Pro is ideal for measuring the EC, pH and temperature of nutrient water for plants and water in swimming pools, jacuzzis and ponds. The easy-to-use buttons allow you to easily switch between the parameters. The meter is calibrated and supplied with batteries.
A 3 in 1 hand meter, for both the novice and the experienced grower.
This meter from Aquamaster is simple and clear to use. Don't pay too much for different hand meters and opt for the convenience of the Aquamaster 3 in 1 hand meter.
The meter shows the measured values at a glance and with a simple push of a button you switch from pH to EC measurement.
Specifications:
- Waterproof
- Auto Calibration
- Battery level indicator
- IP65 standard
- Replaceable electrode
- Immediately ready for use
- Temperature displayed in Celsius and Farhenheit
- Clear multilingual manual
- Auto Shut Off: after 5 minutes
- Battery: 3 x 1.5V AG-13 Button Cell (included)
- Dimensions: 183 x 37 x 37mm.
- Weight: 90gr.
Range:
- PH: 0.0-14.0
- EC: 0.0-19.9 us/cm
- Temperature: 0ºC - 60ºC (32ºF - 140ºF)
Resolution:
- pH: 0.1pH
- EC: 0.1 (equals 0.1µs/cm)
Accuracy:
- pH: 0.0 -~ 14.0 pH
- EC: 0.0 ~ 19.9 µS/cm
- Temperature: 0ºC ( 32.0ºF )
- Temperature Compensation: 0ºC to 60ºC (32ºF to 140ºF )
- Working Temperature: 0ºC - 60ºC ( 32ºF - 140ºF )
Instructions
- Remove the protective cap from the Aqua Master Tools meter.
- Clean the electrode with distilled water and dry it.
- Press the power button.
- Insert the meter upright in the solution to the brim and stir gently.
- Press the C/F key to switch between Celsius and Fahrenheit
- Press the PH/EC button to switch between PH and EC.
- After use, rinse with water and press the power button.
- Store the meter upright with the storage solution in the protective cap
Content:
- Digital 3 in 1 meter, including batteries
- Screwdriver to calibrate
- Manual in Dutch
- 1 year warranty*
- Calibrated and supplied with batteries.
The meter is also available as a combo set with; additional electrode, associated calibration fluid or additional electrode and associated calibration fluid.
Brand | AquaMaster |
Article code | EGS-1453 |
SKU | 1453 |