WAGO

750-523

€50,00

A connected actuator or load is switched via the relay output module. The 24 VDC supply is derived from the power jumper contacts to trigger the relays.The switched status of the relay is shown by the manual switch (1/0). The operating mode can be set usi

Op voorraad
Op werkdagen voor 14:00 uur dezelfde dag nog verstuurd!
Aantal
- +
Productomschrijving

A connected actuator or load is switched via the relay output module. The 24 VDC supply is derived from the power jumper contacts to trigger the relays.

The switched status of the relay is shown by the manual switch (1/0). The operating mode can be set using a manual/automatic selector switch. The mode status is indicated by an LED and via status bits in the process image.

Manual: Coil triggering is interrupted. Actuation only via the red manual operating switches.

Auto: The relay is operated via the control system. Manual status changeover via manual operating switch is canceled by the control system in less than 500 ms.

The manual switch can also be used without 24 V supply to switch the output ON.

The relay meets both international standards of IEC and DIN EN 61810 part 1 /VDE 0435 part 201 as well as overload and short circuit requirements of IEC and DIN EN 61036 /61037.

 

 

Disclaimer:

De WAGO modulen die wij verkopen zijn ooit gebruikt in testopstellingen en/of nooit gebruikt in een opstelling maar wel hiervoor nieuw aangeschaft. De nieuwe modulen zitten nog in de originele gesloten verpakkingen. De reeds gebruikte modulen zijn niet meer dan twee weken gebruikt voor testdoeleinden. 
Indien het om een gebruikt product gaat wordt dat in de titel vermeld.

 

Product informatie
Merk WAGO
Artikelcode 750-523
Mijn account
U bent niet ingelogd. Log in om van alle voordelen gebruik te kunnen maken. Of maak nu een account aan.
Taal
Winkelwagen
Uw winkelwagen is leeg
Menu
Zoeken
Search suggestions
Geen producten gevonden...